Roller Bit

Roller Bit
Roller Cone Bit
Roller Bit Drilling
We can offer tricone bits, PDC bits, hole opener, foundation roller cones and related tools for oil well drilling, gas well drilling, geothermal well drilling, mining, geological survey, hydrographic survey, water well drilling, HDD pipelines projects, foundation projects. With professional technology, we have been providing optimized solutions for various of drilling applications for more than 10 years.

评论

发表评论

此博客中的热门博文

The Things Of Drilling Driver Should Note

图片
Let us learn about some things of drilling driver should note! 1. DTH drill driver must abide by the mine "General Safety Operation Procedures for Post Work". 2. DTH drill drivers must abide by the safety regulations for commuting cars and hosting. 3. DTH drill drivers must comply with the safety regulations for the management of the cannon, the edge of the steps and the day of the run.  4. When moving the  DTH drill bits  or replacing the drill pipe, we should pay close attention to the high voltage line around it so as not to touch it. 5. When checking and handling cable and other electrical faults, the drop switch must be removed. 7. When working on a large shelf for high-altitude work, you must wear a safety helmet and a guardian, and you are not allowed to stand under the large shelf. 8. Thunderstorms and windy days are prohibited from working on high. We are  DTH drilling tools supplier , welcome to contact us!
阅读全文

The Features Of Roller Cone Bit

图片
Let's take a look at the features of  roller cone bit . 1. The use of high-strength and high-toughness alloy teeth makes it improve the resistance of the teeth to impact, reduce the chance of broken teeth, and the soft formation is equipped with a spoon-shaped tooth. 2. A layer of the hard alloy is placed on the bearing of the tooth, and the roller bearing is also silver plated so that the bearing has improved the ability to resist seizure and load. 3. The O-ring seal adopts a more wear-resistant high-saturated nitrile rubber, which increases the cross-section of the seal ring, and increases the sealing small boss at the outer end of the seal area to improve the reliability of the seal. 4. the use of steel ball locking cone, can be suitable for relatively high speed. 5. The number of teeth to be optimized and the equipment such as the tooth and the alloy tooth can maximize the cutting and speed of the drill. 6. the use of a new production of grease that can withstand t...
阅读全文

Instructions Of DTH Drill Bit

图片
In order to properly use the  DTH drill bits  and ensure the drilling speed and service life of the drill bit, the following points must be noted: 1. Select the down-the-hole drill bit according to the rock condition and the type of rig. Different forms of alloy teeth and cloth teeth are suitable for drilling different rocks. 2. When installing the down-the-hole drill bit, the drill bit should be placed gently into the drill bit of the down-hole impactor card. Do not force the collision to avoid damage to the drill bit or the cardholder; 3. During the rock drilling process, it is necessary to ensure that the pressure of the downhole drilling rig is sufficient. If the impactor is interrupted, or the blast hole is not well discharged, the compressed air system of the downhole drilling rig should be inspected to ensure that there is no slag in the hole during the drilling process; 4. If metal objects are found to fall into the hole, they should be sucked out by magnets o...
阅读全文