Coal Cutting Drill Bits

Coal Cutting Tools
Coal Cutting Drill Bits
Bullet Bit Tungsten Carbide Coal Mining Tools
Product performance;
Alloy steel Body, made by material ASTM4142 or 42CrMo,heat treatment with 40-44HRC hardness, has high toughness and wearable character.
The unimate round shank bit,rock drilling teeth,tungsten carbide drill rock bit adapt to the machine with all the performance features such as a high feed rate,a long service life and short tool changing times.Together with the parts supply assurance,a high daily production volume,and above-average economy is guaranteed.
product application;
The complete tools apply for foundation creation,trenching,solid wall,mining,water well drilling,tunnelling.

评论

发表评论

此博客中的热门博文

The Things Of Drilling Driver Should Note

图片
Let us learn about some things of drilling driver should note! 1. DTH drill driver must abide by the mine "General Safety Operation Procedures for Post Work". 2. DTH drill drivers must abide by the safety regulations for commuting cars and hosting. 3. DTH drill drivers must comply with the safety regulations for the management of the cannon, the edge of the steps and the day of the run.  4. When moving the  DTH drill bits  or replacing the drill pipe, we should pay close attention to the high voltage line around it so as not to touch it. 5. When checking and handling cable and other electrical faults, the drop switch must be removed. 7. When working on a large shelf for high-altitude work, you must wear a safety helmet and a guardian, and you are not allowed to stand under the large shelf. 8. Thunderstorms and windy days are prohibited from working on high. We are  DTH drilling tools supplier , welcome to contact us!
阅读全文

Rolling Cutter Bits's Type

图片
Rolling filler pieces, which some might also involve roller cone bits or tri-cone pieces, have three cones. Each cone could be rotated separately as soon as the drill string rotates the entire body of this piece. There are two sorts of  roller bit  pieces that are milled-tooth pieces and tungsten carbide inserts (insert pieces ). These pieces are classified by the way the teeth are fabricated: 1.Milled-tooth bits Milled-tooth pieces have steel tooth cutters, which can be fabricated as regions of the piece cone. The bits cut or gouge formations out when they are being rotated. The teeth change in size and form, based upon the formation. Teeth of the bits are different depending on structures as follows: Soft formation: Your teeth must be long, slim and widely dispersed. These teeth will create freshly broken cuttings from delicate formations. Tough formation: Your teeth should be brief and tightly spaced. TThese teeth will produce smaller, more rounded, crushed, and ...
阅读全文

What Do We Need to Pay Attention to When Using The DTH Drilling Tools?

图片
A lot of folks don't understand using principles to begin the  DTH drilling tools  operations, which is also quite dangerous. To begin with, once we use the DTH drilling gear, we need to prepare the rock hole first. Obviously, we must consider the way of drilling the hole at the specifications of their caverns. Occasionally, we must chisel the flat gap, and at times we chisel down, and also to get different methods of drilling, then, we will need to utilize the submersible drilling gear.  Secondly, from the usage of DTH drilling applications, we also must use different resources and place the gas and water pipeline in the neighborhood of our job, in order that we may use it right if we have the requirement. Obviously, sometimes people's layouts are somewhat distinct, and the kinds of holes are somewhat distinct. We will need to take into consideration many scenarios and variables.  Thirdly, after utilizing the DTH drilling instrument, we must first check ...
阅读全文