Roller Bit Drilling

Roller Bit
Roller Cone Bit
Roller Bit Drilling
Tricone Bits
PDC Drill Bits
We can offer tricone bits, PDC bits, hole opener, foundation roller cones and related tools for oil well drilling, gas well drilling, geothermal well drilling, mining, geological survey, hydrographic survey, water well drilling, HDD pipelines projects, foundation projects. With professional technology, we have been providing optimized solutions for various of drilling applications for more than 10 years.

评论

发表评论

此博客中的热门博文

Radiation Problem Of Roller Cone Bit

图片
The experts of  roller cone bit  analysis from a professional point of view, in fact, the electric field and magnetic field are radiated outward. The radiation of the cone bit is much less than that of many electrical appliances at home. Electromagnetic radiation refers to the phenomenon that energy is emitted into space in the form of the electromagnetic waveform, or is interpreted as energy in the form of the electromagnetic waveform in the air. Electromagnetic radiation refers to the phenomenon that energy is emitted into space in the form of the electromagnetic waveform, or is interpreted as the propagation of energy in space in the form of the electromagnetic waveform. Scientists have discovered that electromagnetic waves are everywhere as long as electricity is available. All kinds of electronic devices, including computers, TV sets, air conditioners, mobile phones, TV sets, microwave ovens and so on, will produce electromagnetic waves of different wavelengths and frequ...
阅读全文

The Storage Of DTH Drilling Tool's Impactor

图片
Let's learn about the storage of  DTH drilling tools  impactors. Short-term storage First, blow away the water in the impactor. Second, add one liter of tail oil from the upper part. Third, open the wind and blow for about 10 seconds, so that the internal parts of the impactor can be fully lubricated. Fourth, It is like the drill pipe, the upper and lower joints are respectively covered with rubber covers. Fifth, placing the impactor horizontally in a dry environment. Long-term preservation First, blowing away the water in the impactor. Second, unscrewing the upper and lower connectors and disassemble the impactor. Third, checking and wipe all internal parts, preferably in clean rooms. Fourth, lubricating all parts properly with the suitable lubricant. Fifth, assembling the impactor and cover the upper and lower joints with rubber cover. Sixth, placing the impactor horizontally in a dry environment. We are  DTH drilling tools wholesaler , welc...
阅读全文

How To Maintain The Roller Cone Bit

图片
Roller cone bit  is the most widely used drill bit. Let's take a look at how to maintain and use the roller cone bit! 1. After the spring warm ceasefire, the areas with poor water quality should pay attention to sewage and scale removal. Then, the cone body and system must be kept full of water to prevent the system and the cone bit body from oxidizing and corrosion. 2. Remove coal ash, smoke oil and rust in time after the ceasefire. The cone bit body should be kept dry, put some lime in the roller cone bit to prevent moisture, and the surface of the exposed water jacket is brushed with oil to prevent moisture corrosion and shorten the service life of the cone bit body. 3. Clean up the dust in the chimney and cover the chimney outlet to prevent rain from entering the water. 4. Maintain good ventilation around the cone bit body. It is strictly forbidden to wrap the cone bit with plastic. 5. During the heating period, if the roller bit is not running temporarily, the water...
阅读全文